Wanted:-
The timing belt cover plastic bit which covers the pulleys on the phase 3 zetec - black top.

Pete,

Should be able to help you there fella!!

Have a look at my photo archive under 'Build Diary November 2006', you 'll find pics of my spare Zetec SE engine that I picked up from Fleabay for £31.09 I'm 99.99999% sure that's the one your after; you are more than welcome to the cover mate.......I a'int gonna need it!!

U2U me mate if your interested

Mark

I am guessing that the SE one will be no good for you as that is a different engine to the S and the E (1.8 &2.0).

I have a spare for a silvertop but I am not sure if they are the same. I am only across off the M180 so you can have it if you come to collect.

I will be travelling down the M1 on Sunday so could meet you at Woodall Services.

Or they have some nice clear ones on ebay, although they are not exactly locost.

Thanks both, I have put a picture of my engine type in my photo archive - Zetec3, pic is identical to my motor.

Ah Well.....there goes my 99.99999% theory!!

TangoMan is absolutly correct, I went into autopilot with my reply as soon as I noticed 'Blacktop' without considering if you had the 1.8 or 2.0 litre Duratec model!!

Best of luck on your find anyway!!


[Edited on 23/7/07 by seadog]