cautionary note screwfix sell a mini chopsaw only 39.99 a neat compact thing?but do not sell replacement discs @150 x2.5 x22.2 mounting and guess what nobody else seems to oh BUGGER. I only managed to get ten cuts out of it and its bottomed out martin

150mm = 6".

You've probably already looked at this, but would 6" grinder metal cutting discs not fit (available from local DIY store)?

[Edited on 8/12/04 by stevebubs]

well the problem lies in the spidle centre@22.2 which is usually for 300+ discs and most small angle grinders are between 115 &125 not 150 they then start up again at 180. i have been given a disc to try 150 x3.2!!! not sure if the motor will like spinning through material though. thanx for the thought

I believe there are 15mm-22mm spindle adapters out there.

Let us know if you find a source of suitable discs.

Cheers

Stephen

There are 180x22.2x3mm blades available and various sizes in stainless cutting discs with the 22.2mm centre.
http://www.johndavies.co.uk/nabdisc.htm
The AS30 flat at the bottom of the page sound favourite. The centre spindle adaptors usually go the other way to what you need on this occasion.

[Edited on 9/12/04 by Peteff]

I've just bought a 150mm grinding disk with a 22.2 bore from B&Q warehouse!

Hope this helps.

Matt

I believe I got MORE than what I paid for. I CANT COMPLAIN for £27 Plus £6.50 postage - Good Old Ebay.!!!


NEW Chop saw I bought



[Edited on 15/12/2004 by wilkingj]

found a very good supplier in gloucester who seemed to have thousands of different types of abrasive materials from a sheet of sandpaper to abrasive coating dust to huge grinding discs bought 25 sanding discs for angle grinder for a fiver and 5 discs for chop saw for six pound contact garmur abrasives 01452527665