hi all, has anybody got a set of motorbike bench lift plans on there computer, they could email me?
i would like to have a go at building one, but just need to see where to start really, so i can change bits as i build
cheers
stuart
http://www.bikeliftplans.co.uk/
cheers, i have seen that, would rather a locost solution
stu
I built my chassis and assembled most of my car on one I made
that is very similar to the one in Mookaloid's link.
Fitted the wheels, dropped the table, and wheeled it out of the garage.
It all seems sooooooooo long ago.
Cheers
Paul G
that is very similar do mine plan, is to use it to raise the car up, and for my dad to do a bike on as well.
have you got any pictures of yours Paul?
stu
quote:
Originally posted by Stuart_B
cheers, i have seen that, would rather a locost solution
stu
I have a set of plans I can mail you....
cheers Paul for the other, maybe i will have the mk out one day and pop around
hi David, if you do not mind, could you email them to me at, stuart.stuart.1991@gmail.com
cheers
stuart
Have a look here
http://www.mig-welding.co.uk/forum/showthread.php?t=10487
quote:
Originally posted by Stuart_B
cheers, i have seen that, would rather a locost solution
stu
quote:
Originally posted by 907
I built my chassis and assembled most of my car on one I made
that is very similar to the one in Mookaloid's link.
Fitted the wheels, dropped the table, and wheeled it out of the garage.
It all seems sooooooooo long ago.
Cheers
Paul G
Sorry but no pics Ben.
Same as the one in the link in design, but made from 50 x 50 x 3 box.
Jack seat area the same (angle)
Cross member that the jack goes under made from thick wall 2" pipe.
Cheers
Paul G
(It's a pain having no "Browse" button)