Board logo

Stainless Sheet
liam.mccaffrey - 19/12/10 at 06:26 PM

Whats the going rate for an 8x4 sheet of 0.9mm stainless sheet? Abyone know?

Alternatively anyone wanting to sell any sheet need approx 42"x24"

[Edited on 19/12/10 by liam.mccaffrey]

matt_claydon - 19/12/10 at 06:29 PM

quote:
Originally posted by liam.mccaffrey
Whats the going rate for an 8x4 sheet of 0.9" stainless sheet? Abyone know?

Alternatively anyone wanting to sell any sheet need approx 42"x24"


0.9 inch thick? You won the lottery?

Mal - 19/12/10 at 06:31 PM

I paid £51 for the a sheet of grade 304 from a stockholder 18 months ago.

Mal - 19/12/10 at 06:31 PM

I paid £51 for the a sheet of grade 304 from a stockholder 18 months ago.

Mal - 19/12/10 at 06:33 PM

Don't press send twice!

designer - 19/12/10 at 06:35 PM

Hope that's 0.9 mill!!

liam.mccaffrey - 19/12/10 at 06:39 PM

0.9mm

Volvorsport - 19/12/10 at 06:45 PM

dont mean 20g do you !

ill get u a price but it wont be cheapish due to shipping

balidey - 19/12/10 at 09:19 PM

I asked about this at my work last week, about £70

skodaman - 19/12/10 at 10:56 PM

So how much is an 8 x 4 sheet of ally for the bodywork?

John Bonnett - 20/12/10 at 08:47 AM

Everyone has a non ferrous metal supplier in their area and these are the first places to call. In your case, I found
Enterprise Metals Co. Kemys Way, Swansea Enterprise Park, Swansea, West Glamorgan SA6 8QF, worth giving them a bell I'd have thought.

[Edited on 20/12/10 by John Bonnett]

NS Dev - 20/12/10 at 09:09 AM

quote:
Originally posted by liam.mccaffrey
Whats the going rate for an 8x4 sheet of 0.9mm stainless sheet? Abyone know?

Alternatively anyone wanting to sell any sheet need approx 42"x24"

[Edited on 19/12/10 by liam.mccaffrey]


You'll be best to get a 2m x 1m sheet, bit nearer the amount you need.

Price depends on required finish more than anything. Bright annealed 304 would be around £40 including vat for a 2x1 sheet

liam.mccaffrey - 20/12/10 at 09:59 AM

Thats great Nat, finish is unimportant and much cheaper than I expected!

quote:
Originally posted by NS Dev
quote:
Originally posted by liam.mccaffrey
Whats the going rate for an 8x4 sheet of 0.9mm stainless sheet? Abyone know?

Alternatively anyone wanting to sell any sheet need approx 42"x24"

[Edited on 19/12/10 by liam.mccaffrey]


You'll be best to get a 2m x 1m sheet, bit nearer the amount you need.

Price depends on required finish more than anything. Bright annealed 304 would be around £40 including vat for a 2x1 sheet

kj - 20/12/10 at 10:13 AM

Hi Liam,

Might be worth a try giving Handyandy a shout i gave him a few sheets a while ago he may still have some.

Worth a shot