Any one used/seen these? linky could you get a RWD gearbox out of say an MX5 using one or would the cross members get in the way?

Cheers

Mark

i have seen one in use,it wobbled like a jelly the X member would get in the way,only any use for taking wheels off etc really

ok What do we think of these then? MOBILE TILTING CAR LIFT RAMP *FREE 595mm AXLE STANDS* | eBay

That first lift would be OK if you like working on your knees! We have a scissor lift at work that lifts a car up to 2 metres with no cross member that is fine for most jobs. If you have enough hieght then you can't beat a 2 poster

quote:

---

Originally posted by mookaloid
ok What do we think of these then? MOBILE TILTING CAR LIFT RAMP *FREE 595mm AXLE STANDS* | eBay

---

Its meant for servicing brakes and dropping out oils, no good for taking big bits out

For that you need a four poster or two poster with arms that come in from the side, which if I had the space would purchase.

Like SUPERB BRAND NEW RAMP 2 POST LIFT ELECTRO-HYDRAULIC | eBay

But at that price its going to be a bit wobbly and weak, all you need to do is not lift to full height.

Regards Mark

[Edited on 28/1/12 by mark chandler]

Watched someone take the engine the bottom or of a mk2 MR2 Turbo with only a trolley jack, engine crane and axle stands but i wouldnt have gone near the job. Horses for courses.



Daniel

why bother when you can do it like this

here is another method

Thanks Chaps - I think I'll have a closer look at the proper 2 poster then