Board logo

Do your tools also talk to you?!
bi22le - 4/3/12 at 03:19 PM

I have just been using a Dremel to make some ends for my new trumpet velicity stacks. So for the last few hours I have had the noise in my ear hole and I am sure the Dremel was repeating the words:

"I know" In a simpathetic way

and

"all right" in a knowing or comforting way.

Over and over again as I was grinding with it.

I have had angle grinders simply go "AAAGGGGGGGGGGGGGHHHHHHHHHHHH" as your cutting too

So what do your power tools say to you?!?!


CRAIGR - 4/3/12 at 03:29 PM

You've not taken your medication have you Bizzle


lewis - 4/3/12 at 03:29 PM

You know your not suppost to use power tools while drinking don't you.


Angel Acevedo - 4/3/12 at 04:16 PM

STOP USING TOOL-DOSE!!!
It is highly ADDICTIVE!!!


scudderfish - 4/3/12 at 04:19 PM

This guy did


bonzoronnie - 4/3/12 at 04:20 PM

Never heard my tools talking to me but the little buggers spend most of their life hiding from me

Take today for instance, I broke my T40 torx bit & spent over an hour looking for one of my old ones.

During that search, found loads of things that I looked for in the past & never found but never found my spare torx bit


lotusmadandy - 4/3/12 at 04:46 PM

The gear i already have never says a word.

Its the tools i look at in halfrauds and the like,
that always say 'buy me please'

Andy


D Beddows - 4/3/12 at 05:24 PM

Steady on, you're one step away from this bloke:





my little lad loves him and I have to say he never seems to do any of the work - the tools do - so perhaps it's the way forward........ or you could just start taking the medication again!


omega 24 v6 - 4/3/12 at 05:30 PM

Handi Mani. My grandson likes him too.


Benzine - 4/3/12 at 05:30 PM

My drill gives me detailed instructions on how to wire and map megasquirt, but it's all in mandarin and under 20 Hz


blakep82 - 4/3/12 at 05:40 PM

all of mine taunt me, tell me i'm shite....


Peteff - 4/3/12 at 08:34 PM

I have a ball pein hammer that tells me to kill people


Mr G - 4/3/12 at 09:38 PM