Board logo

Refitting a windscreen
Barkalarr - 4/2/17 at 10:45 PM

I'm trying to find some masking tape to hold a windscreen in while the adhesive drys.
Can someone point me in the direction of some super sticky 2" masking tape.
Thanks


obfripper - 4/2/17 at 10:59 PM

3m 3434 blue masking tape is pretty good and will peel off cleanly afterwards.

Dave


benchmark51 - 4/2/17 at 11:29 PM

If your using the right windscreen adhesive you won't need tape to hold it. If this is a diy first attempt look at utube videos first. The proper stuff has enough 'grab' to hold it in place.


gremlin1234 - 5/2/17 at 12:59 AM

quote:
Originally posted by obfripper
3m 3434 blue masking tape is pretty good and will peel off cleanly afterwards.

Dave
having used the 'blue' tape before, its all I will normally use now. if you need 2inch, then two or three strips will do it. but I would use it for masking not holding it in position.


rusty nuts - 5/2/17 at 08:32 AM

Gaffs tape to hold in position


Barkalarr - 5/2/17 at 08:41 AM

Thanks chaps, I've just bought some 3m 3434 Blue tape - lets see how this works...