Hi,

Which style of centre rear view mirror have people used for SVA? I have tried a suction cup style and it doesn't angle correctly when mounted on the MNR scuttle unless you wish to see pursuing helicopters!

Thanks,
Steve

We use a modified sierra one.

procedure as follows.

Nip down scrap yard pull mirror and mounting arm off sierra ( I am sure others are usable ).

Cut the plate off ( where you would stick the sticky pad on and atah to screen )

sleave the other end with a peice of tube and 5-6 inches. stick in place or mash up the tube so the mirror end cant move.

other end of the tube inseret / stick / weld an m5 or m6 bolt in.

Bolt through scuttle ( this can be replaced with the single bolt one when the SVA one falls off ) as shown on many of the MNR cars.

Sure Marc / chris will let you borrow one

will see if I have a photo

Cheers I will give Chris a call.

Why not just use a suction one, couple of quid in Wilkinsons or about 8 quid in Halfrauds, was fine for my SVA!

Rich.

The angle of the MNR scuttle means it wont adjust far enough down to see the road behind.

Steve

aha! that'll be a problem then :-)

quote:

---

Originally posted by Howlor
The angle of the MNR scuttle means it wont adjust far enough down to see the road behind.

Steve

---