Board logo

pinto inlet manifold for bike carbs
*davies144* - 4/4/09 at 05:34 PM

hi has anyone got any diagrams, pics etc??? i am intending on using the dizzy still so to see what you have done with the vacuum pipes would be good!

jacko - 4/4/09 at 06:03 PM

have a look in my photos under zx9r /manifold
the vacuum bit is a can of worms
some say you can do it some say not
bogg brothers just set my dizzy timing to 34% with a strobe light and removed the vacuum pipe
until i got a modifide dizzy
Jacko

jacko - 4/4/09 at 06:05 PM

have a look here

quote:

http://www.locostbuilders.co.uk/viewthread.php?tid=109321

Jacko

*davies144* - 5/4/09 at 05:50 PM

ok so what do people use to conect the 4 pipes into 1?

jacko - 5/4/09 at 07:06 PM

Run the 4 vacuum pipes into a small cylinder ie 15mm copper pipe 50mm long both ends blocked and 1 out to the dizzy