Hi,

Anyone got any pics of where they placed the trigger wheel pickup on a pinto engine?

Cheers,
James

no pics but...

I made a (probably hugely over engineered) bracket out of 2.5mm thick ally with various braces and formers rivetd on.....

It is bolted to the 2 spare (17mm??) bolt holes on the lower lefthand side of the block just forward of and below the dizzy

can take a piccy at the w/e if you want

HTH

I used some alluminium angle to make a bracket off the lower timing belt cover bolt locations.

Means I don't have a timing belt cover though although I could make it work.

I was going to use the locations David has but felt they were too far away.

Seems OK so far.

Mine is like this





Few more in my gallery

Regards

Rich


[Edited on 25/5/07 by RichardK]

Cheers!

quote:

---

Originally posted by RichardK
Mine is like this


[img]

Few more in my gallery

Regards

Rich


[Edited on 25/5/07 by RichardK]

---

Not the best piccy but here you go....


[img][/img]