Board logo

Coil Pack connections + spare plug
Dave Bailey - 11/11/07 at 09:01 PM

Just got round to buidling my wiring harness and found that I do not have a connector to connect into the coil pack on my ST170 engine. I have all the other connections but not this one.. Anyone got a spare plus know which pin is which?

thanks
Dave B




MkIndy7 - 11/11/07 at 09:06 PM

Can't help you with a spare plug, but if its the same as the Fiesta etc Ford coil packs.

As in the photo:
The left pin is sparks 2+3
Centre pin is an ignition live
Right pin is sparks 1+4


Dave Bailey - 11/11/07 at 09:08 PM

thanks


MkIndy7 - 11/11/07 at 09:13 PM

Ooops EDIT EDIT EDIT

The left pin is spark output A, sparks 1+4

The right pin is spark output B, sparks 2+3

Diagram


Dave Bailey - 11/11/07 at 09:38 PM

O dear......too late connected it up to my £4000 race tuned engine and blew the lot.......caught fire and burn out my Porche in the adajacent garage also!..... must be some liability surely!


MkIndy7 - 11/11/07 at 09:48 PM

Tut Tut

You should never work in the garage without a suitable Fire extinguisher to hand

... would have saved the Porche atleast

[Edited on 11/11/07 by MkIndy7]


big_wasa - 12/11/07 at 06:43 AM

Will have a look tonight for a spare


Dave Bailey - 12/11/07 at 08:43 AM

thanks
Dave B


desmo - 13/11/07 at 07:47 AM

I have a square connector on my wiring loop instead of an oval one. I got the same coil pack as you can see above. Does anyone know where I van find such a connector?
greetz,
Desmo


desmo - 13/11/07 at 07:47 AM

I have a square connector on my wiring loom instead of an oval one. I got the same coil pack as you can see above. Does anyone know where I can find such a connector?
greetz,
Desmo

[Edited on 13/11/07 by desmo]


mark-wiring - 13/11/07 at 05:56 PM

Later black top zetec engines use this type so look for a '99 on mondeo focus etc to be sure