Board logo

Dead LC1 - Where are the cost effective replacements from?
Steve Lovelock - 14/10/08 at 07:58 PM

I need to buy a LC1 sensor which I believe is the Bosch LSU4.2 (#3737).

I can only find them for about £70 in the UK but can get them for £40 in USA. Is there anywhere cheaper in the UK?

meany - 14/10/08 at 08:16 PM

did you try :

http://www.gendan.co.uk/

the_fbi - 14/10/08 at 09:28 PM

eBay is your friend.

£35 + Delivery, UK supply although you may have to remove the connector and put on your old one. I can't remember what the standard on with the LC-1 is like.

Steve Lovelock - 15/10/08 at 06:21 AM

Well the £35 sensor comes with only 5 wires and the current one has 6 or 7. Will a numpty (ie me) be able to work out which wires to join together or can I assume that the colours will match?

David Jenkins - 15/10/08 at 07:51 AM

Just to confuse, the connector has 6 wires in and 5 out!

There's an internal calibration resistor in the sensor plug - which shouldn't be removed.