Board logo

speedo
uklee70 - 31/7/09 at 03:01 PM

Hi All

I'm having a few problems with the speedo

I have finally got it working went out with the sat nav to get the correct speed.

the speedo is not that far out but It gives a very irratic reading suddeny jumping up 10 to 20mph then back down.

Is this down to the fact I'm using 8 magnets would I be better to go down to 4 and then adjust on the speedo healer

Im using the triumph clocks and sensor

any ideas anyone

Lee

ps This th last job before SVA re test


snapper - 31/7/09 at 06:05 PM

Most people use 4 or even 2 magnets, also check the gap and the stability of the bracket holding the sensor.


snapper - 31/7/09 at 06:08 PM

Another thing, use shielded twin core and earth the shield one end.