Board logo

Blue and black wires - which one is live?
Humbug - 28/10/09 at 02:32 PM

OK... I might try to get my Caterham heated screen wired up. Looks simple enough, just one wire each side: one black, one blue.

so... which is live and which is earth?

TIA

Simon


speedyxjs - 28/10/09 at 02:34 PM

Black is almost always earth

ETA - if you wire it the wrong way, does in become a cooled screen?

[Edited on 28-10-09 by speedyxjs]


matt_claydon - 28/10/09 at 02:38 PM

It shouldn't make any difference, it's only a big resistor. By convention black would probably be ground in the Caterham installation though.


Mr Whippy - 28/10/09 at 02:58 PM

quote:
Originally posted by matt_claydon
It shouldn't make any difference, it's only a big resistor. By convention black would probably be ground in the Caterham installation though.


ditto


t16turbotone - 28/10/09 at 03:38 PM

yep...makes no difference


Humbug - 28/10/09 at 03:46 PM

OK, ta chaps


turbodisplay - 28/10/09 at 06:15 PM

I once wired a cvh ecu loom into a fiesta, the ignition live was black wires, ground brown. So when dealing with ford, balck is not earth. (Almost caught me out!)

Darren