Board logo

Things I wish existed
scudderfish - 14/8/11 at 02:06 PM

Heat shrink tubing you could put on a wire after you had soldered both ends up.


westf27 - 14/8/11 at 02:16 PM

a pot of gold dubloons I forgot I had and found whilst clearing out.


tomgregory2000 - 14/8/11 at 02:32 PM

Hot women who were intrested in cars


RAYLEE29 - 14/8/11 at 02:34 PM

really good glue that only sticks what you want it to
Ray


balidey - 14/8/11 at 02:54 PM

quote:
Originally posted by tomgregory2000
Hot women who were intrested in cars


Hot women who were interested in me


Ivan - 14/8/11 at 03:00 PM

Supercars and yachts that I could afford.

Or in other words an ability to sing or play soccer really well.


jollygreengiant - 14/8/11 at 03:07 PM

Politcians who could ONLY tell the truth.


DIY Si - 14/8/11 at 03:37 PM

quote:
Originally posted by jollygreengiant
Politcians who could ONLY tell the truth.


There's always a sensible one isn't there!


AdrianH - 14/8/11 at 03:39 PM

quote:
Originally posted by DIY Si
quote:
Originally posted by jollygreengiant
Politcians who could ONLY tell the truth.


There's always a sensible one isn't there!


No more like an impossible dream!

Adrian


coozer - 14/8/11 at 03:45 PM

Ladies who keep at it years on like you've just met.....


spiderman - 14/8/11 at 04:07 PM

quote:
Originally posted by scudderfish
Heat shrink tubing you could put on a wire after you had soldered both ends up.


Heatshrink tape is available from RS Components, or if the wire is detatchable but with connector soldered on heatshrink tubing with a shrink ratio of 4:1 should fit over the connector and shrink down enough to capture wire and connector it is also adhesive lined so is waterproof as well.


scudderfish - 14/8/11 at 04:12 PM

quote:
Originally posted by spiderman
quote:
Originally posted by scudderfish
Heat shrink tubing you could put on a wire after you had soldered both ends up.


Heatshrink tape is available from RS Components, or if the wire is detatchable but with connector soldered on heatshrink tubing with a shrink ratio of 4:1 should fit over the connector and shrink down enough to capture wire and connector it is also adhesive lined so is waterproof as well.


Ooo, I'll have to get some of that!