As per the title really. If anyone has an Innovate sensor handy, I desperately need a photo or layout info of the sensor plug. I've stripped the pins out of the plug, passed it through the bulkhead and reached a problem. The photos I've taken are heavily over exposed and the white and yellow look the same. Combined with my colour blindness and we've got a problem. need a better photo really.

Thanks guys

just popped mine out for a look and it's like so:

1 - black
2 - empty
3 - grey
4 - white
5 - yellow
6 -red

Theres number stamped inside my sensor plug but if yours hasnt then with the plug connector facing me and the rounded side of the plug to the left the numbering is:

6 4 2
5 3 1

No camera sorry



[Edited on 24-6-12 by flibble]

any help

http://www.megamanual.com/PWC/wire.htm

Thanks for the info guys. I've got it wired in properly, but all it reads is 5v / full lean? I was hoping I had made a mess of the plug wiring. Looks like the sensor is bust