Board logo

Light6 LED display help
Dooey99 - 3/2/14 at 07:52 PM

can anyone help me wire this beauty it... http://www.europaspares.com/warning-light-module-84x14mm.html

i got the 'instructions' with it but they are little use, they say which wire is for what but dont say where they need to go?

i dont know weather im suppose to run them to earth or put a positive feed in...

it has;

-12v live feed (Geen)
-Left Hand indicator (Orange)
-Earth (Black)
-Main Beam (Red)
-Battery Light (White)
-Oil Light (Blue)
-Brake Test (Brown)
-Right Hand indicator (Yellow)

which ones require a positive feed in for the LED and which require earthing out? PLEASE HELP

ashg - 3/2/14 at 11:05 PM

wire pos and neg up then touch each of the other wires on the neg terminal. if the other wires require a pos feed touching them on neg wont damage them as neg to neg wont do naff all.

Dooey99 - 3/2/14 at 11:16 PM

Yeah I thoughts about doing that but my wiring is here there and everywhere ATM so that would involve me having to wait :/

ashg - 4/2/14 at 12:05 AM

just do it with a 12v battery or battery charger.

ste - 4/2/14 at 02:45 AM

quote:
Originally posted by ashg
wire pos and neg up then touch each of the other wires on the neg terminal. if the other wires require a pos feed touching them on neg wont damage them as neg to neg wont do naff all.


Neither will pos to pos.

What ever you do to test it, make sure there's a fuse in there to protect it while you prod around with bare wires

Dooey99 - 4/2/14 at 07:33 AM

I have just thought of the obvious, I'll use my power probe which sits in my tool box at work