Board logo

7 sized carb engine loom
mongrelwestie - 3/8/16 at 10:07 PM

Where's a good spot to get a full car loom?


axle - 4/8/16 at 01:56 PM

Modify the original from the Donner it can save a lot of time trying to adopt it to your car using the original wiring diagram it keeps the cost down too.


mongrelwestie - 4/8/16 at 02:15 PM

I'm anal! I want a nice clean new simple loom, I'm not running wipers, washers and heaters etc so just simple stuff


axle - 4/8/16 at 07:57 PM

Okay try
http://www.autosparks.co.uk/

I hope they can help


hkp57 - 5/8/16 at 06:35 AM

http://www.rapidfitlooms.co.uk/7stylewiringloom.htm

http://www.elitemotorsport.co.uk/budget-car-wiring-loom-77-p.asp

http://www.bodylogicuk.com/index.php/5/512522/


snowy2 - 6/8/16 at 06:35 AM

make one.......
i have just rewired my car (including the engine ecu....) the cars electrics with all the switches and relays (15 relays and 20 fuses in total) only took a weekend.....mind you i have done it a few times.
but rewiring a car is VERY EASY.........
there is an article on this forum showing you how.


axle - 6/8/16 at 07:54 AM

any idea where this article would be I like to improve my wiring skills?



quote:
Originally posted by snowy2
make one.......
i have just rewired my car (including the engine ecu....) the cars electrics with all the switches and relays (15 relays and 20 fuses in total) only took a weekend.....mind you i have done it a few times.
but rewiring a car is VERY EASY.........
there is an article on this forum showing you how.


snowy2 - 6/8/16 at 10:04 AM

Brought it to the top of the list for you......dave


axle - 6/8/16 at 06:54 PM

Hi Dave
Sorry for being a bit thick I do not see it , thanks for your help it is not magazine ad on the main page?


snowy2 - 6/8/16 at 08:38 PM

It's called "how to wire your car" it the post u der or above this one....


axle - 7/8/16 at 08:10 AM

cheers Dave tremendous help

[Edited on 7/8/16 by axle]

[Edited on 7/8/16 by axle]

[Edited on 7/8/16 by axle]


snowy2 - 7/8/16 at 11:54 AM

No problems......you don't have to use connectors the way I have shown you but it's a tried and tested system .......worked on several cars with out issues....