Hi

I have got a alternator off a mitsubishi colt and wondering how to wire it up. There is 2 screw connectors, one larger one marked B the other with no markings. Then there are 4 spade connectors marked A, F, N, E as in the pic below. All i need to connect up is the wire going to the starter motor, the charge light wire, and an earth if it needs it. I'm guessing the fat red wie from the starter goes to the bigger screw connecter marked B. If an earth is needed, that goes to the smaller screw one, but i havent got a clue where the charge light will go.

Any ideas?

Thanks