It took me a hell of a lot longer to figure these out that it should have done as the wire colours in the haynes manual are wrong for some of the wires. So I thought I would share my little list I wrote up last night. (I will eventually put it on my site as well)

The list covers the most complex part of the loom (i.e. the dash area), the rest of the loom is easy to work out in comparison.

Hope its of use to someone.

Cheers,
David

Edit - I should point out that the start button, start relay and fog light arent standard and are circuits i have added in, so if you have a normal loom, ignore them!

[Edited on 14/2/06 by flak monkey]