Board logo

MX6 V6 2.5L KLDE whole car for sale
KFC - 4/11/13 at 11:13 PM

Hi,
As the ad says. I have a very good runner MX6 that is my main and only commuter car.
I originally bought the car for the engine to put in a kit car. I'm not ready for it yet so I think I will have to sell it. She is a very good runner and it would actually be a shame to strip it for parts.

I've done an oil change with an engine flush and all the filters, changed the thermostat and antifreeze just as a precaution and changed the front calliper seals, brakes all around are good, newish exhaust and the engine is in good health, no oil leaks, burns oil knocks or clunks, on start up you can hear one hydraulic lifter a bit slow to stop ticking but goes quiet soon after.

I did a vacuum test on the engine which actually tells you a lot, I was very happy to see that the engine is very good, the needle never fluttered, good compression, seals and head gaskets.

It has a MOT till next July, tax till the end of December.
I live in Coventry CV3.

I'm not giving it away as in is still a good runner and looks good. I'm looking for about £500

MX6
MX6


[Edited on 4/11/13 by KFC]

[Edited on 5/11/13 by KFC]


slingshot2000 - 4/11/13 at 11:20 PM

If you give us an idea of your location (in your profile), you mat find someone in your vicinity that would be interested in this.

Regards
Jon

P.S. I am sure a few photographs would help !


KFC - 4/11/13 at 11:24 PM

quote:
Originally posted by slingshot2000
If you give us an idea of your location (in your profile), you mat find someone in your vicinity that would be interested in this.

Regards
Jon

P.S. I am sure a few photographs would help !


Ah yeah, area would help... I couldn't see how to ad photo's, just drag them on?
Cheers


mcerd1 - 5/11/13 at 08:31 AM

you need to add them to your photo archive first (or another photo hosting website) then copy and paste the links above the pic in your archive

http://www.locostbuilders.co.uk/photos.php


KFC - 5/11/13 at 05:37 PM

quote:
Originally posted by mcerd1
you need to add them to your photo archive first (or another photo hosting website) then copy and paste the links above the pic in your archive

http://www.locostbuilders.co.uk/photos.php


Done,

Cheers for that.


puma931 - 5/11/13 at 05:37 PM

Let me know if you break the car as I am after an engine.


KFC - 5/11/13 at 05:49 PM

quote:
Originally posted by puma931
Let me know if you break the car as I am after an engine.


Would you be after the loom ecu and inlet or the bare engine? How much are you expecting to pay?


puma931 - 6/11/13 at 11:03 AM

Bare engine with could pack and leads. No ecu, loom or injectuion system, as I plan to fits carbs and mate it to an MX5 box etc. Looking to pay around £150 for the engine.

quote:
Originally posted by KFC
quote:
Originally posted by puma931
Let me know if you break the car as I am after an engine.


Would you be after the loom ecu and inlet or the bare engine? How much are you expecting to pay?


KFC - 6/11/13 at 12:18 PM

quote:
Originally posted by puma931
Bare engine with could pack and leads. No ecu, loom or injectuion system, as I plan to fits carbs and mate it to an MX5 box etc. Looking to pay around £150 for the engine.

quote:
Originally posted by KFC
quote:
Originally posted by puma931
Let me know if you break the car as I am after an engine.


Would you be after the loom ecu and inlet or the bare engine? How much are you expecting to pay?



I wanted the same but bought a car instead because there weren't any engines about.


me! - 6/11/13 at 05:22 PM

Is this still available?


KFC - 6/11/13 at 05:42 PM

quote:
Originally posted by me!
Is this still available?


I still have the car yes.
U2U message me if you want?


me! - 6/11/13 at 06:17 PM

U2U Sent...