Board logo

any bargins at newark?
franky - 19/6/10 at 05:24 PM

going for a poke around tomorrow. Any bargins to be had?

flak monkey - 19/6/10 at 05:48 PM

Theres a few parts stalls which have loads of odds and ends. You might find something you need

jossey - 19/6/10 at 06:45 PM

got a few bits for my brakes and i found a stall with some bonnext catches for a few quid.

i got a brake inline sensor which was only £5 which is cheap for one to go on teh brake lines.

have fun.


there are so many locosts indys etc there.

nick205 - 19/6/10 at 11:05 PM

quote:
Originally posted by jossey
got a few bits for my brakes and i found a stall with some bonnext catches for a few quid.

i got a brake inline sensor which was only £5 which is cheap for one to go on teh brake lines.

have fun.


there are so many locosts indys etc there.



Two top tips if it's a hydraulic switch...

1. Install it in the front brake lines not the rear, particularly if you have an adjustable bias set-up.

2. Install it upside down to avoid getting air trapped in it when bleeding the system.

Both the above improve the switches response to line pressure and therefore the point at which your brake lights come on

jossey - 20/6/10 at 09:57 AM

thanks nick.

gonna have a go now.

sent extra thanks by U2u