Megajolt query
Just a quick question:
Got megajolt all up and running on a 2.0l zetec with bike carbs except the tps on the chart is not travelling the full scale only from 10 to 20%. The
rpm is advancing fine. I've calibrated the tps and it works fine on the analogue readout on the software.
Cheers..Andy
Best place to ask would be the MJ forum, here (if you haven't already).
Thanks, i've now done that. Didn't realise that forum was there.
It's a good place to know about if you're a MJ owner! The designer, Brent Picasso, is always on there to answer questions and he's very good at finding solutions for people.
check that you are getting a good vacum to the megajolt. if you have a vacum leak then this will cause this.
quote:
Originally posted by mad4x4
check that you are getting a good vacum to the megajolt. if you have a vacum leak then this will cause this.