To use a pinto starter motor on a zetec it needs to spaced from the bellhousing by 14mm, I have made a spacer and thought I'd share the drawing with you that I used.

Cheers

Rich

I ended up turning some thickish "tube" type spacers and just tack welded some thin steel sheet to stop the crud getting in (and to aid fitting them without playing chase the spacer!)
Mine was the most minimal affort solution I could think of at the time ..but I'm liking the way you did it !

Nice Rich,

That looks better than my effort.I believe
a bit of ripping off is in order

Andy