Board logo

remote linkage
Rob E - 17/10/10 at 06:07 PM

Hi all I am I think looking for a MT75 remote linkage , would this make the gear change much more precise as my box seems very floppy ? I had a sneaky peak on the westfield site EXSPENSIVE or what, anyone know where I could go to get a cheaper one ??

Cheers
Rob

[Edited on 17/10/10 by Rob E]

snapper - 17/10/10 at 06:35 PM

I take it you have a standard MT75 linkage
Or do youhave an early Robin Hood extended one?
The early linkages were cr4p.
If you have a standard linkage it's not a hard job to extend it, it is bolted on in more places

snapper - 17/10/10 at 06:36 PM

I take it you have a standard MT75 linkage
Or do youhave an early Robin Hood extended one?
The early linkages were cr4p.
If you have a standard linkage it's not a hard job to extend it, it is bolted on in more places

big_wasa - 17/10/10 at 06:48 PM

Gbs do one

this is mine

[img][/img]

interestedparty - 17/10/10 at 07:22 PM

quote:
Originally posted by big_wasa
Gbs do one

this is mine

[img][/img]


It looks like the gear lever plate is welded to the chassis, is that ok? How well does it cope with gearbox movement? Reson I ask is gearchange mechanism is normally fixed to the gearbox rather than the chassis.

big_wasa - 17/10/10 at 07:52 PM

the engine is very solid, it works fine.

Rob E - 17/10/10 at 08:07 PM

found this http://home.arcor.de/wolke1709/seven/08_02_03.html deos anyone know what the eye thing is called ???

big_wasa - 18/10/10 at 03:54 PM

Rose joint is one name, well actually a brand name. Spherical bearing.

Stick either in ebay and it will bring up loads in differant sizes.

Rob E - 18/10/10 at 04:30 PM

Thanks for that could'nt think of the name