Can anyone provide me with a diagram as to how they have plumbed up their Pinto engines to use a header tank please?


Thanks

Ash

No diagram but loads of pictures in my gallery below.

Cheers

Rich

you only need one inlet and one outlet to the header tank on a pinto.

the inlet is normally a 6mm pipe going into the top of the header tank - connect this to the rad overflow pipe

the outlet, at the bottom, (sizes can range from 13mm-19mm) connects to the inlet on the water pump.

thermastat housing breather you can blank off (like i have). the 32mm outlet goes to the top hose of the rad.

the bottom hose of the rad goes to the big inlet to the water pump (42mm i think)

HTH's

Alex

This is how I plan on connecting mine up:


Cooling

HTH

JB

[Edited on 23/3/11 by Daddylonglegs]

thanks gents - just as I expected.

Thanks for the assistance..... off for a beer.