Board logo

Bellhousing Clutch Cable Spacer
SALAD - 31/10/13 at 08:10 PM

Someone on here made a bigger headed spacer for their clutch cable adjuster on their Type 9 but I now can't find the thread.

I don't have the standard one to use as a guide so can anyone send me one.....or make me a bigger one?

Ben_Copeland - 31/10/13 at 08:26 PM

Get a hydraulic clutch.

SALAD - 31/10/13 at 08:30 PM

Your face is hydraulic.

Ben_Copeland - 31/10/13 at 08:34 PM

quote:
Originally posted by SALAD
Your face is hydraulic.


Don't want them Cambelt pillars then

SALAD - 31/10/13 at 08:39 PM

That's a different topic/thread and we're being civilised in that one!

snapper - 1/11/13 at 05:52 AM

I just space it out with thick washers or steel tube
As your effectively lengthening the outer you can do this at either end

[Edited on 1/11/13 by snapper]

SALAD - 1/11/13 at 09:04 AM

The problem is that there isn't enough of the adjuster in the bellhousing to make it sturdy. I will need to secure the cable better but the spacing needs to be one piece and sit in the bellhousing.

I'm going to try and make one later with the help of my lathe friend.....ooh lathe friend, friend.