Board logo

Zetec / Type 9 clutch
Plunky - 23/4/14 at 12:36 PM

Hi Guys,

I know there is loads of info on the web about clutches for zetec / type 9 conversions... however I am asking for something a bit specialised.

I am currently changing my silvertop for a blacktop and thought I had better change the clutch while it is all out.

the clutch has the following numbers on it...

LUK - 284 04 / 237 10

Any ideas what clutch it is?



Thanks
Liam

owelly - 23/4/14 at 04:31 PM

Give these guys a ring:
http://www.clutch-specialists.co.uk/
Tell them the I/PPC Magazine gave you their details. ;-)

mcerd1 - 24/4/14 at 07:55 AM

sorry can't tell you what the number means

but if you can measure the size of it that'll help narrow down the possibilities

Plunky - 27/4/14 at 10:50 AM

Clutch diameter is 217mm

coozer - 27/4/14 at 10:53 AM

What flywheel is it? 2.0 or 1.8?

Plunky - 27/4/14 at 11:08 AM

I'm assuming 2.0, could be wrong though, is there an easy way to tell?

coozer - 27/4/14 at 04:25 PM

This is a 1.8, does it look like this?




Or, does the clutch sit 'inside' as the 2L job has a raised section round the edge.

Paul Turner - 27/4/14 at 05:44 PM

And here is a 2 litre one.


[img]
[/img]

Plunky - 27/4/14 at 06:43 PM

I think it is the 1.8 one from memory

coozer - 27/4/14 at 07:34 PM

A Mk1 Mondeo clutch fits the 1.8 no problem.

Plunky - 27/4/14 at 10:08 PM

http://bit.ly/1nxPKw9

Like this one?

Paul Turner - 28/4/14 at 09:09 AM

quote:
Originally posted by Plunky
http://bit.ly/1nxPKw9

Like this one?


That will not fit a 1.8 flywheel. The photo's on the 2 posts above clearly show the difference and the clutches are not interchangeable.

The clutch in your link is for a FORD MONDEO MK1 MK2 2.0 1993 TO 1998 , spot the 2.0 in the listing title.

This is probably what you need for a 1.8 flywheel (from the same site).

FORD MONDEO MK1 1.6 1.8 CLUTCH KIT NEW

[Edited on 28/4/14 by Paul Turner]