What do we think of this sump please?
Ebay item 182523721953
Not sure how to put a link to the item.
I wouldn't bother... I had to return 2 and get paypal involved to get my money back. The inside edge caught on the rod bolts everytime the crank
rotated causing a big bang, luckily i was only hand cranking it with a spanner. The 1st one they said was a 1 off miss build, until the 2nd one did
exactly the same thing. Quality was ok ish, just didn't fit. They tried to tell me i had a different 2.0 blacktop to the rest of the know
universe.
I ended up chopping my sump instead, GBS do a similar replacement sump to this for £300 which is cheaper than most sump kits, but still a little
pricey, but alot better.
I ended up using the standard 2 piece sump and chopping the steel lower part.
There's a really good guide on here somewhere of how to do it...
I don't/can't weld, so i just chopped up all of the bits and got someone else to do it including shortening of the pickup and adding
baffles.
Worked a treat and cost me less than £50 with other people doing the welding!
quote:
Originally posted by pekwah1
I ended up using the standard 2 piece sump and chopping the steel lower part.
There's a really good guide on here somewhere of how to do it...
I don't/can't weld, so i just chopped up all of the bits and got someone else to do it including shortening of the pickup and adding baffles.
Worked a treat and cost me less than £50 with other people doing the welding!