Hi
anyone any thoughts on the essex 3.0 v6 engine for an oversized chassis?
cheers
mark
Burton's have a tuning guide for this engine...
clicky here
Not quite what you asked, but may be useful...
David
stephen_gusterson is using a V6 (2.8 I think) so he may be able to give you some thoughts.
Nick
just having a read of that burton site (thanks), looks like it is a very very heavy unit hmmmmm
heavy, rough and unreliable
quote:
Originally posted by Lotusmark2
just having a read of that burton site (thanks), looks like it is a very very heavy unit hmmmmm
Big, heavy, expensive to tune, thirsty to run, quite rare nowadays, sounds nice. Stephen Gusterson is using a Cologne, all the above apply except rarety. In terms of power to weight just about every other (European) Ford engine beats it.
the v6 duratec is a very nice engine ,very powerful ,id have one myself but the misses would only get the hump if i whipped it out of the family cougar!
The v6 duratec is fine as long as it hasn't been over heated or blown up ---
gusters is using the 2.3 (2.4?)v6, not the 2.8.
[Edited on 25/1/05 by JoelP]
You will be stuck for gearbox choice with the Essex: 4spd 3.0 MKI/II Capri or MKI 3.0 Granada, or 4spd + overdrive from Scimitar. If you manage to
bolt on an MT75, let me know how!!!!
Can use type9 with correct bellhousing from 72-75 2.5 Granada. Again, if you manage to find one of those, get one for me too!!