LocostBuilders - powered by XMB

Cosworth roller ITB vacuum take off needed

se7ensport - 18/8/20 at 07:46 PM

Hi folks

Help needed... I have Cosworth roller ITBs and require a vacuum take off for the blipper to work, there are bolts on the top and the bottom of the ITBs, my guess is that the top are used to balance them and the bottom are good to use, can anyone confirm? Any service manuals to support appreciated.

Thanks
Alex

peter030371 - 20/8/20 at 02:32 PM

I have Titan roller ITB on my Duratec and yes the top screws are a balance bleed off type thing which means you should be safe to use the bottom ones I would think. Not 100% certain but 99% sure if that helps!