Board logo

wich solution??
tks - 22/6/05 at 07:55 PM

hello,

i need to mount a sensor (fan switch)
in an piece of tube..

the sensor has M22 but thread 1,5mm pitch..

any one ideas??

where can i buy that nut? to weld it on an piece of 25mm tube?

Tks

stevebubs - 22/6/05 at 09:07 PM

Can you not get a tap that will give you that thread?

Alternatively, I think Car Builder Solutions do an in-line adapter already made.

tks - 25/6/05 at 03:57 PM

and pay 40euro's for one hole..??

Cita - 26/6/05 at 05:38 AM

why do you have to be so blunt?
Stevebubs only tried to help you.

svinto - 26/6/05 at 06:30 PM

How about a big fat blob of epoxy?

stevebubs - 26/6/05 at 07:43 PM

quote:
Originally posted by tks
and pay 40euro's for one hole..??


They are extortionate - I agree.

Could try your local hydraulic place, or a truck (lorry) workshop - I'm sure they'll keep some larger nuts...

(local bus depot?)

Also keep an eye on ebay for taps...there's an M22 x 1mm on there now for £3. May be worth looking out for an M22x1.5 or asking a few of the sellers if they have such a thing in stock


[Edited on 26/6/05 by stevebubs]

tks - 27/6/05 at 04:54 PM

sorry steve,

i didn't mentioned that way.

the ebay idea and the local hydro shop are an good possibility

thanxs

Tks

theconrodkid - 27/6/05 at 05:37 PM

i used some araldite to fix my sender in,hasnt leaked in 5 years