Board logo

Zetec SE 1600 with bike carbs
seadog - 17/5/06 at 07:46 AM

Morning Guy's,

This is the first of many postings no doubt!!

I'm just about to start an MK Indy build with the Zetec SE 1600 lump and would like to do down the bike carb route instead of sticking with the injectors. My concerns are do any of you guy's know of any known issues I may encounter going this route when it comes to the emissions test with the SVA or would you recommend sticking with the injectors?

Many Thanx

Mark


ned - 17/5/06 at 07:53 AM

first of all welcome to the madhouse, i'm sure you will like it here

don't know about the bike carbs though, but as your engine will be post 95 you'll need a cat to get through sva.

Ned.


graememk - 17/5/06 at 08:17 AM

personally keep the injection and go down the megasquirt route


donut - 17/5/06 at 08:39 AM

Welcome.


BKLOCO - 17/5/06 at 09:35 AM

I have not had experience with bike carbs but I have injected my 2.0L Zetec using MegaSquirt. Whilst it is not by any means the easy option it does teach you a hell of a lot about fueling and ignition.
The cheque book method would be to go to somewhere like THIS and buy an off the peg answer.


02GF74 - 17/5/06 at 10:00 AM

find year of engine from engine number. post 95 emissions are stricter - you need a CAT - and from what I read, you will not get through with carbs (no doubt someone will say otherwise)

the article I was referring to:
SVA emission
SVA emission


[Edited on 17/5/06 by 02GF74]


Fozzie - 17/5/06 at 10:13 AM

A very big welcome Mark!
Nice to see you on here at long last!

I can only reiterate our conversation of last night, it will be hard to get through emissions, I do not know enough about mega-squirt, but may be worth investigating.
Have a chat with Surrey Dave at our next meet about mega-squirt! ...

Fozzie


ned - 17/5/06 at 10:24 AM

or on weds night at brands


Fozzie - 17/5/06 at 10:31 AM

quote:
Originally posted by ned
or on weds night at brands


Oooo cripes yeah! Thats looming very quick!

Fozzie


seadog - 17/5/06 at 10:46 AM

Chaps,

Going by the general mood in the camp I think it's wise to stick with the injector route.

I contacted the 'Bogg Brothers' who have been very helpful over the last few days and canceled the order. Unfortunately all of the cars they have converted to bike carbs have all been post SVA. They did say they didn't see any reason why it shouldn't pass however obviously it wouldn't be wise to take that risk.

Chaps, many Thanx for all your advise on this, I look forward to picking your brains again soon!!

Mark.


Surrey Dave - 17/5/06 at 04:34 PM

I have Megajolt (programmable sparks only) and bike carbs.

Dont know about Megasquirt unfortunately.


Fozzie - 17/5/06 at 04:45 PM

quote:
Originally posted by Surrey Dave
I have Megajolt (programmable sparks only) and bike carbs.

Dont know about Megasquirt unfortunately.


Shows how much I know about this new fandangled stuff then doesn't it?
Absolutely mega-nowt!
ROFL

Fozzie


seadog - 17/5/06 at 07:03 PM

Ahh The very famous 'Surrey Dave' I've heard plenty of you through Shortie, Fozzie & Ned....all good of course!!

How do you get on with emissions with your setup Dave or has it never been measured?


ned - 17/5/06 at 08:41 PM

Dogman, he converted to bikecarbs after sva so doubt its been measured unless you have an mot printout dave?

Ned.


bob - 17/5/06 at 09:13 PM

I cant see why bike carbs wont go through the emisions on a pre cat engine,in fact i cant see why it wouldnt go through on a later engine either.

It might mean it will run like crap for the test but hey ho its a pass were after.


Surrey Dave - 17/5/06 at 09:29 PM

Shite don't like the sound of this!!!!

No , my carbs have never been measured on an MOT , dont know why , it might have helped me with setting up.

They seem to be very precise instruments(bike carbs) so I would have thought they could be tuned OK for the emissions.


[Edited on 17/5/06 by Surrey Dave]