Hi
Im changing them at the moment, the ones on the side are no problem but the two behind the flywheel will only knock in about 5mm before they hit something.
Should i be removing then in a different way other than the usual, tap in, rotate, pull out?
thanks kenton

Dril hole for large self tapping screw and use it to lever/pull them out other wise just careful use of a small cold chisel or marlin spike.

[Edited on 11/5/07 by britishtrident]

Or a small bladed screw driver, if like me you don't have a cold chisel handy! Bash it through and lever it out, or self tappers as per BT.