Board logo

Clutch for Zetec & Type 9 gearbox
Bacon2002 - 27/5/07 at 09:30 PM

Hi,
I am about to buy a 2.0l Zetec (black top) and a type 9 gearbox, the engine does not have a clutch, it comes from a Mondeo with 42k miles.
No doubt a dumb question but should I get a replacement clutch for a Mondeo 2.0l?
(A clutch being a pressure plate a friction plate and I assume a trust bearing.)
Many thanks,
David

UncleFista - 27/5/07 at 09:36 PM

All the info you need is Here it even lists part numbers

HTH

stevebubs - 27/5/07 at 10:25 PM

Or just call Dunnell and get a replacement lightened 1.8 flywheel modified to take standard Pinto Clutch

Chippy - 27/5/07 at 11:09 PM

[http://www.gibbs111.fsnet.co.uk/eng_gear_comb.htm[/url]
Try the above site very good, and informative. HTH Ray

spw1970 - 28/5/07 at 09:04 AM

I had a xflow based Sylva Striker that was mated to a type 9 5 speed box. It used the clutch plate from a Sierra and the rest was Mk2 escort. I EVENTUALLY found someone who would sell me just the plate that I needed rather than having to buy a complete clutch kit for a Sierra and throw most of it away....

TangoMan - 28/5/07 at 09:57 AM

quote:
Originally posted by stevebubs
Or just call Dunnell and get a replacement lightened 1.8 flywheel modified to take standard Pinto Clutch


Or Retro Ford in Corby, as they may (or may not) be cheaper. Mine was circa £50 IIRC.