Does anyone know the usual clutch master cylinder bore diameter used with concentric clutch slave cylinders?
I need to match a master cyl. to a Rover concentric slave cyl.
Also has anyone got a link to a threaded fitting so I can replace the quick release standard connector on the plastic pipe with one I can connect to a metal pipe.
Cheers.
Steve.

Oddly enough I just spoke to Burton about clutch master cylinders for their universal concentric clutch slave, and they suggested 0.7". The Rover one may well be different though.

I was running the standard rover master cylinder on my dax (off a sd1) that had a bore of .625 I think, however I've changed to a girling .875, as for the threaded connection - I had to have a goodridge hose made up

HTH

Leigh

Post 1999 Rover 45 uses a more conventional master cylinder than the 75.
I think it is about 0.7" bore.