Major Stare
|
| posted on 4/7/09 at 08:08 PM |
|
|
R1 tickover?
Just a quick question....... what should a 2003, R1 tickover be?
Jon "FISH"
|
|
|
|
|
mad-butcher
|
| posted on 4/7/09 at 08:49 PM |
|
|
I like to set any vehicle ticking over at about 900 to 1000 rpm
tony
|
|
|
cloudy
|
| posted on 4/7/09 at 08:56 PM |
|
|
If it helps book value for gsxr1100 is 1200rpm I think...
www.warnercars.com
|
|
|
smart51
|
| posted on 4/7/09 at 09:18 PM |
|
|
98 R1 is 1000-1100. It idled very badly below this.
|
|
|
adithorp
|
| posted on 4/7/09 at 09:33 PM |
|
|
1000-1100rpm
"A witty saying proves nothing" Voltaire
http://jpsc.org.uk/forum/
|
|
|
Major Stare
|
| posted on 4/7/09 at 10:21 PM |
|
|
Cheers, i'll warm it up again tomorrow and check it.
Seemed a bit low today and the DigiDash wouldnt clear the OPA unless i kept the revs at 1100 - 1200rpm
Jon "FISH"
|
|
|
hobbsy
|
| posted on 4/7/09 at 11:27 PM |
|
|
Depends what you've got the OPA level set to?
Most bike engines have a very low oil pressure at idle when hot.
I'm talking <10psi.
For that reason mine is just over 1000rpm (I'm a lot happier seeing 10psi or so!)
|
|
|
eccsmk
|
| posted on 4/7/09 at 11:41 PM |
|
|
that spooky i was adjusting my tick over today and upped it to suit the oil pressure
my zx is now running 1200rpm at tickover
quote:
Originally posted by hobbsy
Depends what you've got the OPA level set to?
Most bike engines have a very low oil pressure at idle when hot.
I'm talking <10psi.
For that reason mine is just over 1000rpm (I'm a lot happier seeing 10psi or so!)
|
|
|
A1
|
| posted on 5/7/09 at 02:18 PM |
|
|
for the 03 r1 its 1150
thats what mine is at.
|
|
|
