Pdlewis
|
| posted on 26/12/09 at 02:44 PM |
|
|
MNR bonnet scoop how do you fit yours?
Afternoon, happy xmas and all that
I have just come to fit the bonnet scoop to my MNr that I got off MNR a few months ago and Im a bit puzzled as to how to do it. My first though was
glueing front and back would hold it but on closer inspection when i put the scoop on the bonnet only the 4 corners touch the actual bonnet due to the
curve of the bonnet and the scoop.
An suggestions/methods you have used for fitting yours?
Cheers
Paul
Build Photo Album
Updated 05/02/2009
|
|
|
|
|
prawnabie
|
| posted on 26/12/09 at 03:17 PM |
|
|
If it is anything like the carbon mods one, I sanded the corners so it was flush with the bonnet and sikaflexed 4 "L" shape brackets on
and bolted it to the bonnet through these.
You could always used "U" trim where it meets the bonnet if you don't want to sand, or use even more sikiflex instead of bolting it
on.
HTH
SHaun
|
|
|
daniel mason
|
| posted on 26/12/09 at 10:28 PM |
|
|
am sure the mnr guys use sikaflex.it really does get a good hold.
|
|
|
