Humbug
|
| posted on 9/1/10 at 03:57 PM |
|
|
Locost sledge 1.0
Take:
2 front bits of old skis
1 slatted shelf
2 bits of an old dresser
2 bits of batten
a few screws
a length of nylon rope
mix together and you have a locost sledge.
I built it to pull my little lad along on in the snow when he was coming up to 1 year old... he is now just about to be 20 
After reading eznfrank's post I went and dug it out of the garagar for an outing..JPG)
|
|
|
|
|
T66
|
| posted on 9/1/10 at 04:06 PM |
|
|
what a canny dad lol
|
|
|
MakeEverything
|
| posted on 9/1/10 at 04:09 PM |
|
|
but do you still wax the ski's?? 
Kindest Regards,
Richard.
...You can make it foolProof, but youll never make it Idiot Proof!...
|
|
|
Breaker
|
| posted on 9/1/10 at 04:12 PM |
|
|
Locost sledge 1.1
Take:
* 36m of square tube
* a length of nylon rope
* bike/car engine (optional)
Cut the tubes and weld together and you also have a locost sledge.
If you install the nylon rope and pull it yourself you will have a 0.2 bhp sledge
Stick an engine in it and your looking at a 150+ bhp sledge ! 
.jpg)
|
|
|
mad4x4
|
| posted on 9/1/10 at 04:24 PM |
|
|
^^^
Think you going to need to improve the Runners (Skids) on that......
Scot's do it better in Kilts.
MK INDY's Don't Self Centre Regardless of MK Setting !
|
|
|
eznfrank
|
| posted on 9/1/10 at 04:29 PM |
|
|
That looks like it would go well.
Just been out to test mine, on the snow it's a bit slow bu ton compacted snow and ice it goes like poo off a stick
|
|
|
mangogrooveworkshop
|
| posted on 9/1/10 at 06:18 PM |
|
|
not mine
|
|
|
