spunky
|
 posted on 29/4/04 at 06:18 PM |
|
|
petrol tank neck restrictor
Hi all,
this must have been asked loads of times but i can't find it.
What is the diameter required for just unleaded nozzles to fit?
Thanks in advance.
John
|
|
|
|
|
Kitlooney1000
|
| posted on 29/4/04 at 06:19 PM |
|
|
think its 26.5mm or 27.5mm never remember, but gives you a guide
|
|
|
spunky
|
 posted on 29/4/04 at 06:21 PM |
|
|
Now thats service... Cheers mate.
|
|
|
Kitlooney1000
|
| posted on 29/4/04 at 06:50 PM |
|
|
MR SVA says no more than 23.5mm sorry my mistake.
Exact words " check the fuel tank cannot be filled directly from a petrol pump nozzle having an external diameter of 23.6mm or more"
That is on a vehicle fitted with a cat. it stops you putting any other petrol in other than unleaded
[Edited on 29/4/04 by Kitlooney1000]
|
|
|
Deckman001
|
| posted on 29/4/04 at 07:05 PM |
|
|
Is the size different for cars using lead replacement fuel ie: un converted x/flows, as they would have used leaded, and the old cars would still have
the old type filler necks??
Jason
|
|
|
Fifer
|
| posted on 29/4/04 at 07:20 PM |
|
|
Only required on cars with a Cat
|
|
|
Deckman001
|
| posted on 29/4/04 at 10:06 PM |
|
|
Many thanks, was starting to worry
Jason
|
|
|
