wombat
|
posted on 6/7/12 at 09:46 AM |
|
|
CCT133
Hi,
Any ideas on best/cheapest place to buy a CCT133 clutch release bearing?
Local bearing stockist quoted 19.50+vat, is this about right?
Thx
|
|
|
bonzoronnie
|
posted on 6/7/12 at 09:58 AM |
|
|
That is cheaper than what I paid for one from my local motor factors ( £25ish inc VAT )
I would imagine you'll not find a new one for a lot less
|
|
loggyboy
|
posted on 6/7/12 at 10:05 AM |
|
|
Cheapest Ive found (part number is equivent of CCT133)
Clutch Release Thrust Bearing Fits Ford Capri / Cortina / Sierra | eBay
Mistral Motorsport
|
|
Chippy
|
posted on 6/7/12 at 10:46 AM |
|
|
quote: Originally posted by loggyboy
Cheapest Ive found (part number is equivent of CCT133)
Clutch Release Thrust Bearing Fits Ford Capri / Cortina / Sierra | eBay
Thats 20 spline, thought that the Sierra was 23. May be wrong of course. Cheers Ray
To make a car go faster, just add lightness. Colin Chapman - OR - fit a bigger engine. Chippy
|
|
loggyboy
|
posted on 6/7/12 at 10:57 AM |
|
|
Good point I was using this as reference.
http://www.cnkxb.com/constrastmodel3.asp
Mistral Motorsport
|
|
snapper
|
posted on 6/7/12 at 11:00 AM |
|
|
Plines have nothing to do with it
Fits both the 7/8" and 1" input shaft trust me
I eat to survive
I drink to forget
I breath to pi55 my ex wife off (and now my ex partner)
|
|
Chippy
|
posted on 6/7/12 at 02:44 PM |
|
|
quote: Originally posted by snapper
Plines have nothing to do with it
Fits both the 7/8" and 1" input shaft trust me
And why wouldnt we sir! Cheers Ray
To make a car go faster, just add lightness. Colin Chapman - OR - fit a bigger engine. Chippy
|
|
big_wasa
|
posted on 6/7/12 at 03:15 PM |
|
|
yep you wont find cheaper than that but have you tried automotive bearings on the industrial estate near you ? should you wish to buy over the
counter.
|
|
wombat
|
posted on 9/7/12 at 03:17 PM |
|
|
Result - Got the CCT133 and Spigot bearing for 25quid all in.
BRT Bearings Ltd
Wisbech
Start fitting tonight...
|
|