1.4 Golf Mk3 Head Gasket ABD

Not logged in [Login - Register]

LocostBuilders » Forum » Anything Else Car Related » 1.4 Golf Mk3 Head Gasket ABD

MIG Welders & ARC Welders at MachineMart.co.uk

Printable Version | Subscribe | Add to Favourites

davidimurray

Contributor

Posts 813
Registered 25/1/10
Location South Wales
Member Is Offline

Photo Archive Go!

Building: Haynes Roadster

posted on 27/1/14 at 10:49 AM

1.4 Golf Mk3 Head Gasket ABD

While over at the brother in laws house yesterday he mentioned how his Girlfriends Mk3 Golf had a squeeling fan belt. Had a quick look and noticed all the oil leakign out the rocker cover gasket. Mentioned it must use a lot and he said it also uses lots of water...... Oil filler cap off and lots of dread mayo! Guess what I am doing next weekend!

Two questions really - has anyone done the head gasket on the VW 1.4 ABD engine - anything to watch out for?
Second one is I am hoping the mayo isn't too bad but what is the best way of cleaning it out? There is nothing on the dip stick only on the filler cap.

adithorp

Contributor

Posts 9425
Registered 14/5/07
Location Hyde, Manchester
Member Is Offline

Photo Archive Go!

Building: Built - Fury '06R1 ...now on with the mods

posted on 27/1/14 at 01:26 PM

Head gasket problems aren't that common on those IME. Mayo on the filler cap is on cars doing lots of short trips and is usually due to not getting to oil hot enough to evaporate condensation build up. If there's no sign in the sump it's more likely to be that than the gasket. Look elsewhere for the water loss first to rule out a separate leak.

"A witty saying proves nothing" Voltaire

http://jpsc.org.uk/forum/

britishtrident

Contributor

Posts 17025
Registered 6/3/04
Location Blantyre
Member Is Offline

Photo Archive Go!

Building:

posted on 27/1/14 at 02:52 PM

To many cold runs, if it was the head gasket it would be using coolant. An engine produces something like 40 gallons of water for every gallon of fuel burnt, some of that ends up in the sump and unless the engine is running hot enough to turn it to vapour it stays in the oil system.
Check the thermostat is working and the fan isn't cutting in too early.

[I] “ What use our work, Bennet, if we cannot care for those we love? .”
― From BBC TV/Amazon's Ripper Street.
[/I]

omega 24 v6

Contributor

Posts 4567
Registered 15/1/05
Location scotland
Member Is Offline

Photo Archive Go!

Building: A post sva car

posted on 27/1/14 at 05:42 PM

It is using coolant BT.

If it looks wrong it probably is wrong.

rusty nuts

Contributor

Posts 10950
Registered 21/10/03
Location Cambridge
Member Is Offline

Photo Archive Go!

Building: luego locost on the road

posted on 27/1/14 at 07:44 PM

Check the thermostat, they have a habit of self distracting , also check for staining around the water pump,if doing the head gasket it's worth fitting a new timing belt kit and water pump while your at it. Water pump impeller failure is common on VWs Probably worth checking the breather system as we'll

LocostBuilders » Forum » Anything Else Car Related » 1.4 Golf Mk3 Head Gasket ABD

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.