CosKev3
|
| posted on 27/1/14 at 06:35 PM |
|
|
handbrake cable
What handbrake cable fits the Mac1 ZR chassis please?
Had a cable supplied with my unfinished project I've bought, but tried it earlier and the diameter of the holes in chassis for cable to pass
through/seat in are too small by quite along way.
cheers.
|
|
|
|
|
whitestu
|
| posted on 27/1/14 at 07:59 PM |
|
|
I'm sure the guys at MAC will tell you if you give them a buzz.
Stu
|
|
|
bigrich
|
| posted on 27/1/14 at 09:51 PM |
|
|
Your chassis should use a standard sierra cable.it will need cutting in half and wrapping around the lever quadrant then clamping together. That or
shortening by cutting off one end installing then shorten to length and a new end attaching
Some piccys in my archive
[Edited on 27/1/14 by bigrich]
.JPG)
A pint for the gent and a white wine/fruit based drink for the lady. Those are the rules
|
|
|
CosKev3
|
| posted on 27/1/14 at 10:23 PM |
|
|
Yeah cheers.
Have cut the cable, but its the plastic inserts that are supposed to go in the holes in chassis that won't fit
.
I have checked the part number of cable,and it is a sierra one.
|
|
|
bigrich
|
| posted on 27/1/14 at 10:41 PM |
|
|
Seems odd. How much too small are the holes? Not just thick powder coating obstructing the cable
Best bet is a quick call to Mark or Col in the morning. Sure they will have the answer
A pint for the gent and a white wine/fruit based drink for the lady. Those are the rules
|
|
|
CosKev3
|
| posted on 28/1/14 at 08:40 AM |
|
|
No not powdercoat, the little rubber boots on the ends of cables won't fit into the holes,thats how much too small they are!
[Edited on 28/1/14 by CosKev3]
|
|
|
bigrich
|
| posted on 28/1/14 at 09:20 AM |
|
|
I bet you need the seperate cables they also use. Used them on my Worx build.
A pint for the gent and a white wine/fruit based drink for the lady. Those are the rules
|
|
|
CosKev3
|
| posted on 28/1/14 at 11:16 AM |
|
|
Ah right, ok cheers.
|
|
|
CosKev3
|
| posted on 29/1/14 at 02:11 PM |
|
|
quote:
Originally posted by bigrich
I bet you need the seperate cables they also use. Used them on my Worx build.
seems this is correct, cables from Rally Design according to mac1.
Cheers 
|
|
|
