Rorty
|
 posted on 15/11/04 at 04:28 AM |
|
|
Dimensions of Cortina rack?
Can anyone please help me with the dimensions of a Mk. III, IV, or V rack?
I need the distance between the balljoint centres and the spacing and distance between rack mount holes.
TIA.
Cheers, Rorty.
"Faster than a speeding Pullet".
PLEASE DON'T U2U ME IF YOU WANT A QUICK RESPONSE. TRY EMAILING ME INSTEAD!
|
|
|
|
|
Rorty
|
| posted on 16/11/04 at 04:12 AM |
|
|
Surely somebody has an old Cortina rack laying around that they could run a tape over for me please? Be your best buddy!
Cheers, Rorty.
"Faster than a speeding Pullet".
PLEASE DON'T U2U ME IF YOU WANT A QUICK RESPONSE. TRY EMAILING ME INSTEAD!
|
|
|
James
|
| posted on 16/11/04 at 08:55 AM |
|
|
If I had one I would mate!
James
|
|
|
Rorty
|
| posted on 16/11/04 at 11:20 AM |
|
|
quote:
Originally posted by James
If I had one I would mate!
James
Yes, I know you would M8.
Cheers, Rorty.
"Faster than a speeding Pullet".
PLEASE DON'T U2U ME IF YOU WANT A QUICK RESPONSE. TRY EMAILING ME INSTEAD!
|
|
|
MikeRJ
|
| posted on 16/11/04 at 01:02 PM |
|
|
Sorry Rorty, didn't see this last night. I have a Cortina rack that came of my Robin Hood donor  Don't know what mark Cortina
it's from though. I'll get you the measurements when I get back from work this evening.
|
|
|
MikeRJ
|
| posted on 16/11/04 at 07:02 PM |
|
|
Bit tricky to measure, but distance between balljoint centers is 720mm give or take a few mm. (I'm assuming you mean the balljoints at the ends
of the rack rather than TREs?)
The distance between the mounting centers is approximately 340mm. I can get the mounting points measured more accurately as I still have the Cortina
front subframe. However, it's outside attached to the remains of a Robin Hood wrapped up in a tarpaulin, and it's peeing down so that
will have to wait!
|
|
|
Rorty
|
| posted on 16/11/04 at 08:13 PM |
|
|
quote:
Originally posted by MikeRJ
Bit tricky to measure, but distance between balljoint centers is 720mm give or take a few mm. (I'm assuming you mean the balljoints at the ends
of the rack rather than TREs?)
The distance between the mounting centers is approximately 340mm. I can get the mounting points measured more accurately as I still have the Cortina
front subframe. However, it's outside attached to the remains of a Robin Hood wrapped up in a tarpaulin, and it's peeing down so that
will have to wait!
Mike, I didn't listen to those gossipers, I think you're a fine chap. Thanks. 
Cheers, Rorty.
"Faster than a speeding Pullet".
PLEASE DON'T U2U ME IF YOU WANT A QUICK RESPONSE. TRY EMAILING ME INSTEAD!
|
|
|
