Jumpy Guy
|
| posted on 4/1/05 at 09:39 AM |
|
|
Bit of mild steel tubing/pipe needed
i need a very short piece of mild steel tubing -
90 mm diameter approx, but i only need about four inches worth.....
i cant buy it in less than 3 metre lengths!!
anyone got a wee bit spare lying around that i can buy you a beer for??
|
|
|
|
|
Alan_Thomas
|
| posted on 4/1/05 at 10:05 AM |
|
|
How exact does the 90mm have to be I have a bit of old propshaft tubing you are welcome to have 75mm OD 16SWG
- Alan (Close by in Twyford)
|
|
|
Jumpy Guy
|
| posted on 4/1/05 at 10:12 AM |
|
|
it needs to be at least 85 mm- and up to 100 would be great.
thanks for the offer though!
|
|
|
Peteff
|
| posted on 4/1/05 at 04:58 PM |
|
|
Bend some 16g round a 4" drainpipe and tack it where it meets or find a lorry exhaust that looks something like. I got some 115mm I.D. a couple
of years back and they did have smaller stuff.
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
|
locost7-online.com
|
| posted on 5/1/05 at 11:11 PM |
|
|
i have about 1.5 metres of 100mm tube, approx 1.5mm thick, any good?
Locost Xflow 150bhp injected! Sold :-(
Facebook blog https://www.facebook.com/Johns-Tiger-Avon-Build-814223212056368/
PLEASE NOTE THIS MEMBER IS NOT A TRADER.
|
|
|
