OwenSP
|
| posted on 20/5/17 at 02:12 PM |
|
|
Westfield Zetec Exhaust System - MT75 +prop - Zetec starter - Burton bellhousing - Vintage Revolutions - Revolution Copy - Kit Car Rack
Hi Guys, have some items to sell below. I'm not too sure on what to ask for these so if my prices are too high/too low please give me heads up
via U2U.
Located in Iver Heath, South Bucks
Complete Westfield 2.0 zetec exhaust system -
Manifold was purchased from Westfield a few years ago, used but in great condition as can be seen from the pictures. It's stainless steel so
will polish up a treat and it has the Westfield/stamp logo on it. £365 new from WF, asking £240
Silencer is a nice solid bit of kit, repackable 6 inch, small scrap underneath but not visible when in position - £140
http://parts-shop.westfield-sportscars.co.uk/index.php?route=product/product&product_id=197&search=zetec+exhaust
MT75 Gearbox and prop for Zetec
This was fitted in a Westfield with a 2.0 silver top zetec that had covered 12’000 miles, no issues and it seems to be in very good condition.
Complete with release arm, clutch release bearing with spacer, mount bushes, cables, and prop shaft with 6 bolt rubber coupling etc so it's
ready to drop in and use. £300 collected
Starter motor for zetec, o/s position, sold to me as new but I have not used it. £offers
N/s exhaust can, used on Westfield, has been cut and repacked at some point in its life, not the prettiest but usable - £20
Burton alloy bellhousing. Ford 4 cylinder to Type E etc, starter on o/side. Great condition. £offers
4 Revolution copy alloy wheels. Ford fitment 108pcd with 100mm backspace. In need of a refurb - £40 collected
3 original vintage Revolution alloys. 13x7” Ford fitment, 4” backspace. Classic design in need of a refurb. £90 collected
Kit car steering rack 2.4 turns. Ex-escort rack, length has been extended to fit a kit car, the ends have been sleeved, welded and pinned. 98cm
between threads, 5cm thread each side. £60 collected
[Edited on 20/5/17 by OwenSP]
[Edited on 22/5/17 by OwenSP]
[Edited on 22/5/17 by OwenSP]
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
|
|
cr500dom
|
| posted on 20/5/17 at 08:51 PM |
|
|
Would the bellhousing work with a type 9 do you know ?
|
|
|
OwenSP
|
| posted on 21/5/17 at 11:18 AM |
|
|
I believe if it fits a type E it will fit a type 9, I will check the Burton catalogue and get back to you.
|
|
|
dhutch
|
| posted on 22/5/17 at 12:41 PM |
|
|
First dibs on the manifold please, if it will fit a narrowbody?
U2U sent.
Daniel
|
|
|
rusty nuts
|
| posted on 22/5/17 at 01:10 PM |
|
|
Location?
|
|
|
OwenSP
|
| posted on 22/5/17 at 01:14 PM |
|
|
Apologies - located in Iver Heath, South Bucks
|
|
|
lordbenny
|
| posted on 27/5/17 at 07:37 PM |
|
|
Can you let me know how much you want for the starter motor posted to SW London?
|
|
|
Andybarbet
|
| posted on 27/5/17 at 08:03 PM |
|
|
What size are the 4 revolution copies ? Cheers
Give a man a fish & it will feed him for a day, give him a fishing rod & you've saved a fish.
|
|
|
olimarler
|
| posted on 28/5/17 at 06:37 AM |
|
|
Interested in what size the copies are too?
|
|
|
AndyGilbert
|
| posted on 28/5/17 at 11:44 AM |
|
|
revolution wheels
Hi, interested in those revolution 7x13's, can collect on my way home from work, so when would be best?. I'll try and send a message
If I do manage to make contact and buy, does anybody in Herts/Cambs want anything bringing up?
[Edited on 28/5/17 by AndyGilbert]
c20xe HPC Caterham just sitting here waiting for the sun to shine.
|
|
|
OwenSP
|
| posted on 29/5/17 at 10:27 AM |
|
|
U2Us sent and replied to.
The revolution copies are 13x6
[Edited on 29/5/17 by OwenSP]
|
|
|
OwenSP
|
| posted on 30/5/17 at 06:05 PM |
|
|
Open to offers
Exhaust and manifold together £320
|
|
|
Andybarbet
|
| posted on 30/5/17 at 07:39 PM |
|
|
U2U' d regarding the revolution copy wheels .
Cheers
Give a man a fish & it will feed him for a day, give him a fishing rod & you've saved a fish.
|
|
|
AndyGilbert
|
| posted on 30/5/17 at 08:20 PM |
|
|
I'm collecting parts on Friday, I live North of Cambridge and travelling home via Broxbourne Herts (A10) so if anyone is buying and wants me to
bring it back for the weekend let me know.
c20xe HPC Caterham just sitting here waiting for the sun to shine.
|
|
|
OwenSP
|
| posted on 30/5/17 at 09:19 PM |
|
|
U2U replied
**Revolutions 13x7 sold pending pick up**
|
|
|
OwenSP
|
| posted on 15/6/17 at 04:41 PM |
|
|
All wheels sold, open to offers on everything else
|
|
|
starterman
|
| posted on 15/6/17 at 07:32 PM |
|
|
Would you be able to send the exhaust and silencer? Or even wrap it so that I could send in a courier to collect?
|
|
|
nero1701
|
| posted on 15/6/17 at 08:32 PM |
|
|
Would you concider posting the rack ?
|
|
|
OwenSP
|
| posted on 18/6/17 at 03:35 AM |
|
|
I'm sure I could wrap/package the exhaust and mani if you were to organise a courier. Could probably do the same for the rack.
|
|
|
stevet
|
| posted on 23/6/17 at 05:28 PM |
|
|
Zetec manifold
Hi there - is your zetec manifold still for sale? Thanks.
|
|
|
trevturtle
|
| posted on 24/6/17 at 04:03 AM |
|
|
U2U sent for bell housing and starter
Thanks
|
|
|
OwenSP
|
| posted on 26/6/17 at 09:21 AM |
|
|
Hi guys, I've been away for the last few weeks and will reply to all your U2U messages shortly.
The manifold and exhaust are provisionally sold.
|
|
|
OwenSP
|
| posted on 1/7/17 at 11:24 AM |
|
|
Manifold and exhaust now sold.
Still available:
1. MT75 Gearbox and prop for Zetec complete with release arm, clutch release bearing with spacer, mount bushes, cables, and prop shaft with 6 bolt
rubber coupling etc so it's ready to drop in and use. £300ono collected
2. Starter motor for zetec, o/s position, new. £40
3. N/s exhaust can, used on Westfield, has been cut and repacked at some point in its life, not the prettiest but usable - £10 collected
4. Burton alloy bellhousing. Ford 4 cylinder to Type E etc, starter on o/side. Great condition. £offers
5. Kit car steering rack 2.4 turns. Ex-escort rack, length has been extended to fit a kit car, the ends have been sleeved, welded and pinned. 98cm
between threads, 5cm thread each side. £60 collected
Photos no longer work because the website has changed their rules. Please contact me if you are interested in something and i can send pics..
|
|
|
OwenSP
|
| posted on 16/7/17 at 06:51 PM |
|
|
bump
|
|
|
OwenSP
|
| posted on 29/7/17 at 10:30 PM |
|
|
bump
|
|
|
.jpg)
