ian.stewart
|
| posted on 16/6/18 at 11:03 AM |
|
|
help choosing ECU
I posted in the wanted section earlier, Looking for an ECU and am still looking for one, and now I have been offered a Megasquirt 1 v3, I know its an
older design, is it worth bothering with, and who can set it up in the South East.???? Engine is a 16v 4age, on ITBs
[Edited on 16/6/18 by ian.stewart]
Something different, Very different..............
|
|
|
|
|
MikeR
|
| posted on 16/6/18 at 01:49 PM |
|
|
I'm no expert but I think v1 can be upgraded to V2 by adding a different bit in place of the CPU. So it could be a good starter.
|
|
|
SPYDER
|
| posted on 16/6/18 at 06:46 PM |
|
|
^^^^^^^^ Thats what I have done. MS1v3 upgraded to MS2 by Phil at ExtraEfi. MS2 has a dedicated ITB mode and also has Enhanced Acceleration
Enrichment, EAE, which I have found to be excellent in conjunction with one another for my 3SGE motor.
The MS1 will run the 4AGE as it is especially with the Hi Res code but the upgrade is just better in every respect.
He can also supply a bluetooth module to suit which neatly sidesteps the "serial adapter" problem which besets MS.
[Edited on 16/6/18 by SPYDER]
|
|
|
ian.stewart
|
| posted on 17/6/18 at 03:54 AM |
|
|
Thankyou, thats interesting..... 
Something different, Very different..............
|
|
|
ian.stewart
|
| posted on 17/6/18 at 03:54 AM |
|
|
Thankyou, thats interesting.....
Something different, Very different..............
|
|
|
mackei23b
|
| posted on 17/6/18 at 08:20 AM |
|
|
I had both an MS2 V3 and MS3, both very good.
The V3 Board can be upgraded to an MS2, just buy the new CPU and replace the old chip.
Cheers
Ian
|
|
|
BaileyPerformance
|
| posted on 17/9/18 at 08:34 AM |
|
|
We can upgrade and map your MS1 in same day, bit of a drive, we are in Midlands.
Cheers, Dale.
www.baileyperformance.co.uk
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
.jpg){kind=avatar}
