INDY BIRD
|
| posted on 7/5/07 at 06:16 PM |
|
|
zzr1100 wiring in a resistor Help
Hi got no spark on the engine have been informed i need to wire in a resistor somehwhere to get the correct power to the resistor??
Anyone have any ideas where to wire in and where i can get one from.
Thanks in advance
Sean
|
|
|
|
|
Wadders
|
| posted on 7/5/07 at 06:33 PM |
|
|
Can't help specifically with the ZZR, but on the ZX9 its a 100 ohm resistor, between a live feed and the ecu. From memory its the grey wire, but
do a search and check, as its a long time since i did it. Maplins sell resistors.
Al.
Originally posted by INDY BIRD
Hi got no spark on the engine have been informed i need to wire in a resistor somehwhere to get the correct power to the resistor??
Anyone have any ideas where to wire in and where i can get one from.
Thanks in advance
Sean
|
|
|
russbost
|
| posted on 7/5/07 at 06:47 PM |
|
|
Perfectly prepared to stand corrected, but I don't think there is a resistor on the ZZR, I've always just run a standard bike loom, but if
there is a resistor it must be buried within the loom - if you're running the orig bike loom you shouldn't need an extra resistor.
I'll try & check the wiring dig tomorrow.
I no longer run Furore Products or Furore Cars Ltd, but would still highly recommend them for Acewell dashes, projector headlights, dominator
headlights, indicators, mirrors etc, best prices in the UK! Take a look at http://www.furoreproducts.co.uk/ or find more parts on Ebay, user names
furoreltd & furoreproducts, discounts available for LCB users.
Don't forget Stainless Steel Braided brake hoses, made to your exact requirements in any of around 16 colours.
http://shop.ebay.co.uk/furoreproducts/m.html?_dmd=1&_ipg=50&_sop=12&_rdc=1
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
Guinness
|
| posted on 7/5/07 at 06:56 PM |
|
|
Nope, no resistor in my wiring either.
Mike
|
|
|
INDY BIRD
|
| posted on 7/5/07 at 08:15 PM |
|
|
Thanks for the response ill look furhter then.
Just cant get any spark anoying me now.
But ill study the loom and check each wire again.
the stop switch on the bike is permanantly wire together could this be causing anything????
as coils have power but no spark after the coils.
the bike ignition runs to the sierra ignition and the start button permanantly wired together, could this cause a prob also ????
thanks
Sean
[Edited on 7/5/07 by INDY BIRD]
|
|
|
russbost
|
| posted on 7/5/07 at 09:39 PM |
|
|
I can't remember - is the stop switch open circuit for stop or closed circuit for stop??? If you've got it wired closed & it's
closed for stop ......................
I no longer run Furore Products or Furore Cars Ltd, but would still highly recommend them for Acewell dashes, projector headlights, dominator
headlights, indicators, mirrors etc, best prices in the UK! Take a look at http://www.furoreproducts.co.uk/ or find more parts on Ebay, user names
furoreltd & furoreproducts, discounts available for LCB users.
Don't forget Stainless Steel Braided brake hoses, made to your exact requirements in any of around 16 colours.
http://shop.ebay.co.uk/furoreproducts/m.html?_dmd=1&_ipg=50&_sop=12&_rdc=1
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
