bitsilly
|
| posted on 4/7/07 at 05:44 PM |
|
|
Digidash calibration ???
I have a digidash on the R1 mnr. It has not been calibrated. Is it possible to do so without the software that comes with it when new as I don't
have the software?
Oh and do I need to be a computer whizz to do so??
Cheers
|
|
|
|
|
shortie
|
| posted on 4/7/07 at 05:47 PM |
|
|
Is it a DD1 or 2?
You can download the software from etb instruments website I believe but equally everything can be done with the buttons on the Dash itself. You can
also download the instructions to tell you how to do this.
If you get stuck then ring John, he is very helpful indeed.
If you get really stuck U2U me and we can chat over the phone to sort it but it's pretty easy and you don't need to be a computer
whizz.
Rich.
[Edited on 4/7/07 by shortie]
|
|
|
iank
|
| posted on 4/7/07 at 05:49 PM |
|
|
Manuals and software on etb's website
http://www.etbinstruments.com/Digidash_Downloads.htm
--
Never argue with an idiot. They drag you down to their level, then beat you with experience.
Anonymous
|
|
|
Avoneer
|
| posted on 4/7/07 at 05:52 PM |
|
|
You can't change the neutral light on the DD2 without a computer!
Pat...
|
|
|
shortie
|
| posted on 4/7/07 at 05:54 PM |
|
|
I know there's probably a simple answer but why would you want to change the neutral light???
|
|
|
Avoneer
|
| posted on 4/7/07 at 06:12 PM |
|
|
Because it didn't come defaulted as a neutral light!
It has two other functions/options - can't remember what they are though - CEC related I think.
Pat...
|
|
|
shortie
|
| posted on 4/7/07 at 06:27 PM |
|
|
aha! simple answer as I thought!
|
|
|
Agriv8
|
| posted on 4/7/07 at 09:00 PM |
|
|
Bitsilly.
Its really simple. once you have got it to talk to the Computer, give us a shout if you want assistace done a couple for mark in my time
Regards
Agriv8
Agriv8
Taller than your average Guy !
Management is like a tree of monkeys. - Those at the top look down and see a tree full of smiling faces. BUT Those at the bottom look up and see a
tree full of a*seholes .............
|
|
|
gingerprince
|
| posted on 4/7/07 at 09:03 PM |
|
|
quote:
Originally posted by bitsilly
I have a digidash on the R1 mnr. It has not been calibrated. Is it possible to do so without the software that comes with it when new as I don't
have the software?
Oh and do I need to be a computer whizz to do so??
Cheers
you can change pretty much all the settings from the buttons (turn ignition on whilst holding down the left button). However to know the values to
plug in you really need the software (unless you do trial and error).
DOwnload the software from this link. You don't need to physically connect to
it, you can use the figures the software calculator tells you and punch them in manually.
Sy
|
|
|
%20(WinCE).JPG)
