Stantman
|
posted on 23/12/08 at 09:41 AM |
|
|
Exhaust Link pipe
Having installed a new engine I need a new link pipe between manifold and Wunoff silencer. Merlin do a straight pipe that is long enough but needs a
slight bend put in it.
(They also do bends but shallowest one is to much and pushes exhaust against body work.)
Any one know a company in the Bristol area that can manufacture a link pipe or put a slight bend in the Merlin pipe. 2" thin wall stainless
steel pipe.
Cheers Jeff
|
|
|
smart51
|
posted on 23/12/08 at 09:49 AM |
|
|
Why not just have the exhaust straight? Mine is. It doesn't extend further out than the rear arch so there's no problem. The gas flow
might be a bit better too.
Me at Cadwell Park
[Edited on 23-12-2008 by smart51]
|
|
blakep82
|
posted on 23/12/08 at 11:28 AM |
|
|
if its only a very slight bend, cut a slice or two out and weld it back up?
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|